Quantcast
Channel: hashcat Forum - All Forums
Viewing all 7847 articles
Browse latest View live
↧

Is there any pass length workaround?

March 13, 2016, 4:40 pm
$
0
0
I know that the password length is 64 characters and that the most consecutive amount of characters is 2, also that the maximum occurrence of a single character is 8 times. I know that in most cases, the highest supported length is 55, but I wanted to at least give it a shot, so I tried the following: 
Code:
mp64.exe -r 8 -q 2 64chars.hcmask | cudaHashcat64.exe -m 1400 -a 3 --separator=: -o out.txt in.txt
and this is the output - 
Code:
cudaHashcat v2.01 starting...

Device #1: GeForce GTX 980, 4096MB, 1367Mhz, 16MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you erro
rs of code 702
          You can disable it with a regpatch, see here: http://hashcat.net/wiki
/doku.php?id=timeout_patch

Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Scalar-Mode
* Raw-Hash
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel ./kernels/4318/m01400_a3.sm_52.64.cubin
Device #1: Kernel ./kernels/4318/markov_be_v1.sm_52.64.cubin


ATTENTION!
 The wordlist or mask you are using is too small.
 Therefore, oclHashcat is unable to utilize the full parallelization power of y
our GPU(s).
 The cracking speed will drop.
 Workaround: https://hashcat.net/wiki/doku.php?id=frequently_asked_questions#ho
w_to_create_more_work_for_full_speed


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1) [1]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...:        0 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 62/62 (100.00%)
Rejected.......: 0/62 (0.00%)
HWMon.GPU.#1...: 21% Util, 43c Temp,  0rpm Fan


ATTENTION!
 The wordlist or mask you are using is too small.
 Therefore, oclHashcat is unable to utilize the full parallelization power of y
our GPU(s).
 The cracking speed will drop.
 Workaround: https://hashcat.net/wiki/doku.php?id=frequently_asked_questions#ho
w_to_create_more_work_for_full_speed


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1?2) [2]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...:    16868 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 2232/2232 (100.00%)
Rejected.......: 0/2232 (0.00%)
HWMon.GPU.#1...:  2% Util, 44c Temp,  0rpm Fan


ATTENTION!
 The wordlist or mask you are using is too small.
 Therefore, oclHashcat is unable to utilize the full parallelization power of y
our GPU(s).
 The cracking speed will drop.
 Workaround: https://hashcat.net/wiki/doku.php?id=frequently_asked_questions#ho
w_to_create_more_work_for_full_speed


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2) [3]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...:   685.0 kH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 80352/80352 (100.00%)
Rejected.......: 0/80352 (0.00%)
HWMon.GPU.#1...:  2% Util, 44c Temp,  0rpm Fan


ATTENTION!
 The wordlist or mask you are using is too small.
 Therefore, oclHashcat is unable to utilize the full parallelization power of y
our GPU(s).
 The cracking speed will drop.
 Workaround: https://hashcat.net/wiki/doku.php?id=frequently_asked_questions#ho
w_to_create_more_work_for_full_speed


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2) [4]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...: 23772.2 kH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 2892672/2892672 (100.00%)
Rejected.......: 0/2892672 (0.00%)
HWMon.GPU.#1...:  2% Util, 44c Temp,  0rpm Fan


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2?2) [5]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...:   500.8 MH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 104136192/104136192 (100.00%)
Rejected.......: 0/104136192 (0.00%)
HWMon.GPU.#1...: 26% Util, 46c Temp,  0rpm Fan


INFO: approaching final keyspace, workload adjusted


Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2?2?2) [6]
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: Sun Mar 13 19:22:14 2016 (2 secs)
Time.Estimated.: 0 secs
Speed.GPU.#1...:  1371.9 MH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 3748902912/3748902912 (100.00%)
Rejected.......: 0/3748902912 (0.00%)
HWMon.GPU.#1...: 97% Util, 55c Temp,  0rpm Fan

[s]tatus [p]ause [r]esume [b]ypass [q]uit =>
And then it pretty much stops there. I'm not sure if this is because the keyspace is too large or the length is too large. I understand that I normally would not need to pipe in the output of maskprocessor, rather include the hcmask in the oclhashcat parameters, but I do not believe this way supports the -r and -q parameters, which in this case, are very critical to the vastness of the keyspace. Any help is appreciated! Thanks!

EDIT: I almost forgot, I tried this too - 
Code:
sp64.exe -1 ?l?d --pw-min 64 --pw-max 64 --threshold 2 custom.hcstat ?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1 | cudaHashcat64.exe -m 1400 -a 0 --separator=: -o out.txt in.txt
I know that the statsprocessor portion works because I tried outputting a couple of lines and it indeed worked. However, when piped to oclhashcat, the stats output something like this every 10 seconds: 
Code:
Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Pipe
Hash.Target....: [hash]...
Hash.Type......: SHA256
Time.Started...: Sun Mar 13 19:52:45 2016 (30 secs)
Speed.GPU.#1...:        0 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 0
Rejected.......: 0
HWMon.GPU.#1...:  0% Util, 43c Temp,  0rpm Fan
After every 10 seconds, nothing at all changes except for the time in parentheses at the Time.Started line. I'm not sure if this is because the keyspace is too large or it is not doing anything :/
↧
Search

cannot cracking sha1($pass.$salt)

March 14, 2016, 2:15 am
$
0
0
Hello there!

I'm new in this forum and to this program, so I need someone help me Smile

I have promblem with crack sha1($pass.$salt)


this is example hash:
<philsmd: removed several hashes because it's against the rules>

command:

C:\oclHashcat-2.01>oclHashcat64.exe --hash-type 110 --remove --outfile C:/oclHashcat-2.01/result.txt.out C:/oclHashcat-2.01/hash.txt C:\oclHashcat-2.01\wordlist

device:
 win7, 2x AMD R9 390 Series

I appreciate anyone help - thanks!
↧
↧

Slow hashing with R9 290

March 14, 2016, 6:05 pm
$
0
0
Command: clHashcat64.exe -m 2500 -a 3 capture.hccap ?d?d?d?d?d?d?d?d?d?d

Code:
Session.Name...: oclHashcat
Status.........: Running
Input.Mode.....: Mask (84?d?d?d?d?d?d?d?d) [10]
Hash.Target....: <deleted>
Hash.Type......: WPA/WPA2
Time.Started...: Mon Mar 14 19:52:53 2016 (12 secs)
Time.Estimated.: Mon Mar 14 20:14:15 2016 (21 mins, 9 secs)
Speed.GPU.#1...:    78965 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 983040/100000000 (0.98%)
Rejected.......: 0/983040 (0.00%)
Restore.Point..: 983040/100000000 (0.98%)
HWMon.GPU.#1...: 100% Util, 81c Temp, 97% Fan

I know it's a short run and the GPU temperature/fan might look a little off, but that's because the GPU was already warm from a previous hashing session. After letting it settle, the fan speed comes down and the temperatures drop to an acceptable 80 C. AMD control panel shows me that the clock speed is the stock 947 MHz, so no throttling going on there. Is it me, or does this say I'm doing barely 79 kH/s?
↧

keyspace vs speed and time estimated

March 15, 2016, 8:20 am
$
0
0
Hello

I was playing with cudaHashcat today and something is not work right for me...

PHP Code:
Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?u?u?u?u?u?u?u?u) [8]
Hash.Target....: XXX (2c:81:58:XX:XX:XX <-> ce:cd:37:XX:XX:XX)
Hash.Type......: WPA/WPA2
Time.Started...: Tue Mar 15 15:58:49 2016 (24 secs)
Time.Estimated.: Sun Jul 07 04:44:13 2019 (3 years, 112 days)
Speed.GPU.#1...:     2792 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 65536/208827064576 (0.00%)
Rejected.......: 0/65536 (0.00%)
Restore.Point..: 0/8031810176 (0.00%)
HWMon.GPU.#1...: 99% Util, 63c Temp, N/A Fan

[s]tatus [p]ause [r]esume [b]ypass [q]uit => 

From output above, speed of 2792 H/s can be seen and also estimated time of 3 years and 112 days (do not worry, I am not really trying to bruteforce that on my laptop).

Now from "--keyspace" for this same mask

PHP Code:
C:\.....\cudaHashcat-2.01>cudaHashcat64.exe -a 3 -m 2500 C:\...\XXX.hccap ?u?u?u?u?u?u?u?u  --keyspace
cudaHashcat v2.01 starting...

8031810176 

From output above keyspace length 8031810176 can be seen.

But now if we do keyspace/ time.estimated we get speed of 77 H/s which is not 2791 H/s...  how come?
(3y+112d=1207d=104284800 s)
↧

OCL HASHCAT on PC with old ATI graphic card

March 15, 2016, 12:10 pm
$
0
0
Hello everyone,

I am a beginner in the domain of encryption and I have  problems running OCL on my PC.
I have an PC(x86) with an 32bit Win7 and core 2 Duo @ 3 Ghz CPU, and an old ATI graphic card (ATI 2600 XT).

The question that I have for the more advanced than me how can I run the program with out errors like:

oclhascat32.exe   -  "The program can't start because OpenCL.dll is missing from your computer. Try reinstalling the program to fix this program."

cudaHashcat32.exe  - "The program can't start because nvcuda.dll is missing from your computer. Try reinstalling the program to fix this program."

What can I do? What should I try to make it work?
↧
↧

Creating mask file compliant to password policy

March 15, 2016, 2:52 pm
$
0
0
Hello everyone,

I have a password policy that requires a password having at least 8 chars and 3 of these charsets:

- uppercase
- lowercase
- digits
- special

Is there anything inside hashcat suite that could generate a mask file given some constrains? I can easily write a script to do that, but I just wanted to check what's the Right Way to do it.
↧

oclHashcat version 2.10, FPGA support?

March 16, 2016, 6:18 am
$
0
0
As atom said, oclHashcat v2.10 adds supports for FPGA. Does that mean that just run the OpenCL kernels on FPGA?

Running oclHashcat on such device?

[Image: 6971-11752-original.jpg]

As far as I am concerned, the biggest FPGA company Xilinx doesn't release any software that supports OpenCL. Maybe in the future, the SDAccel of Xilinx can run OpenCL on its FPGAs. 

I'm not familiar with Altera, and I think the performance of Altera's FPGAs is lower than Xilinx's FPGAs.

But so far, is there any instance of running oclHashcat on FPGA or some guides to do this?
↧

cannot launch mask attack with hashtopus

March 16, 2016, 1:12 pm
$
0
0
Sorry i'm noob, I have a problem.
Installed Hastopus server and client -->Ok
Got Windows HASHLIST --> Ok
Created MASK attack task --> OK

Launched agent and got:

Code:
Loading task...assigned to 17, hashlist 6 (continue)

File 8char-1l-1u-1d-1s-compliant.hcmask already exists.
Hashlist already exists.
Requesting chunk...keyspace measuring required
Measuring keyspace...D:\SCAMBIO\hashcat\cudaHashcat64.exe -a 3 "D:\SCAMBIO\hashlists\6" "D:\SCAMBIO\files\8char-1l-1u-1d-1s-compliant.hcmask" --hash-type=1000 --session=hashtopus --keyspace --quiet
ERROR: --keyspace is not supported with --increment or mask files
ERROR -1
[ERR] Uploading 114 b...Uploaded 2 errors


What's wrong with it?
Why performing keyspace if attack does't support it?

Thank u all for every help
↧
Search

Heat Control

March 16, 2016, 7:13 pm
$
0
0
Hey guys 

normaly i use my main pc to encypt the hash but i want to use my notebook too

the problem is my gpu heat goes to 90°c and this is to much,


i try to speed up my fans but i cant the nvidia cooling controlls are disabled  like speed fan and other tools.

the notbook isnt selfbuild but i think the connecktet the cpu and gpu cooling or something like that so i cant control it manualy.

so   what i want to know :  
u know a command to order hashcat dont use the full power of my gpu?  maybe 90% ? 
i saw the commands like  gpu temp disable  abbort  but nothing other  : (

my Notebook
nvidia 670m
12 ram
i7-4810MQ 2.80

maybe u have other ideas to fix this problem :  )


greetings  logi
↧
↧

Is oclHashcat support $RAR3$*1*?

March 17, 2016, 2:42 am
$
0
0
I'm using oclHashcat 2.01, and I find trouble when deal with $RAR3$*1*.

I tried $RAR3$*0* is ok. But these rar without open passoword I user rar2join and i get hash like this (I puzzy some real code):
Code:
$RAR3$*1*0000000000000000*00000000*64*112*filename.rar*75


And I get this error in oclHashcat: 

Code:
($RAR3$*1*0000000000000000*00000000*64*112*filename.rar*75): Line-length exception
Parsed Hashes: 1/1 (100.00%)

ERROR: No hashes loaded

I just wonder what is the correct format for $RAR3$*1*?
↧

Creating new or custom charset for hashcat

March 18, 2016, 1:35 am
$
0
0
I need a charset for my language, romanian. In my native language exist some diacritics. How can I use Hascat to crack passwords with diacritics?
↧

Scrape Twitter hashtags

March 19, 2016, 2:11 pm
$
0
0
In the attempt to find better words, I created a scraper for Twitter hashtags.
Personally, I find hashtags pretty interesting: they reflect words and "way of saying" that could be easily used for password. Moreover they are quite long, so they can give some suggestions for password candidates that are out of the reach of brute force attacks.
We could achieve the same result by combining dictionary words, but I think this is a faster method; we know for sure that such combination was used at least once.

Now, enough talking, you can find the repo here:
https://github.com/tampe125/hashtag-scraper

After some quick test (straight attack, no fancy rules), I was able to find words like this:
Code:
washingtonredskins
nostringsattached
popgoestheweasel
thelittleprince
ranchocucamonga
youarenotalone
eastsidemarios
rainraingoaway
genieinabottle
foodforthought

Again, suggestions and comments are more than welcome!
↧

Decrypt this... five figure reward

March 20, 2016, 7:50 am
$
0
0
Not sure if this is the right topic to post the message in.

I've got a 4,400 hashes list, blowfish encrypted.

Need it decrypted ASAP, and willing to offer $5,000 for it. Or I can pay per decrypted hash.. either way...

Let me know.
↧
↧

reference GTX 980 TI

March 21, 2016, 8:04 am
$
0
0
Dear all,
at the moment I am looking to the reference GTX 980 ti graphic cards that comes with a non reference cooler(which is quite loud at full load).
As an example EVGA has ones with a stock NVDIA cooler: http://www.evga.com/Products/Product.asp...P4-4990-KR
And with NVDIA PCB but not a stock cooler: http://www.evga.com/Products/Product.asp...P4-4991-KR
From the documentation both of this cards are with a stock clocks. 

So question is, should I go for a video card that was manufactured fully by NVDIA, or it is also not that bad option to go for EVGA GPU that was manufactured on the NVDIA PCB, but no with that noisy fan?

And what about the video cards that are overclocked on the NVDIA PCB? http://www.evga.com/Products/Product.asp...P4-4992-KR
↧

evga 710 low profile single slot bench

March 21, 2016, 8:40 am
$
0
0
Code:
cudaHashcat v2.01 starting in benchmark-mode...

Device #1: GeForce GT 710, 2040MB, 954Mhz, 1MCU

Hashtype: MD4
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   839.9 MH/s

Hashtype: MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   513.0 MH/s

Hashtype: Half MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   104.5 MH/s

Hashtype: SHA1
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   118.7 MH/s

Hashtype: SHA256
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 43078.1 kH/s

Hashtype: SHA384
Workload: 256 loops, 256 accel

Speed.GPU.#1.:  9488.8 kH/s

Hashtype: SHA512
Workload: 256 loops, 256 accel

Speed.GPU.#1.:  9484.7 kH/s

Hashtype: SHA-3(Keccak)
Workload: 128 loops, 256 accel

Speed.GPU.#1.: 16534.3 kH/s

Hashtype: SipHash
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   380.1 MH/s

Hashtype: RipeMD160
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 87458.9 kH/s

Hashtype: Whirlpool
Workload: 512 loops, 32 accel

Speed.GPU.#1.:  5034.5 kH/s

Hashtype: GOST R 34.11-94
Workload: 512 loops, 64 accel

Speed.GPU.#1.:  3950.5 kH/s

Hashtype: GOST R 34.11-2012 (Streebog) 256-bit
Workload: 512 loops, 16 accel

Speed.GPU.#1.:  1106.3 kH/s

Hashtype: GOST R 34.11-2012 (Streebog) 512-bit
Workload: 512 loops, 16 accel

Speed.GPU.#1.:  1101.6 kH/s

Hashtype: phpass, MD5(Wordpress), MD5(phpBB3), MD5(Joomla)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:   150.8 kH/s

Hashtype: scrypt
Workload: 1 loops, 64 accel

Speed.GPU.#1.:     9012 H/s

Hashtype: PBKDF2-HMAC-MD5
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:   108.8 kH/s

Hashtype: PBKDF2-HMAC-SHA1
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:    60161 H/s

Hashtype: PBKDF2-HMAC-SHA256
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:    19005 H/s

Hashtype: PBKDF2-HMAC-SHA512
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:     4671 H/s

Hashtype: Skype
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   262.7 MH/s

Hashtype: WPA/WPA2
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:     7518 H/s

Hashtype: IKE-PSK MD5
Workload: 512 loops, 128 accel

Speed.GPU.#1.: 10496.9 kH/s

Hashtype: IKE-PSK SHA1
Workload: 512 loops, 128 accel

Speed.GPU.#1.:  7043.5 kH/s

Hashtype: NetNTLMv1-VANILLA / NetNTLMv1+ESS
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   117.2 MH/s

Hashtype: NetNTLMv2
Workload: 1024 loops, 32 accel

Speed.GPU.#1.: 19027.7 kH/s

Hashtype: IPMI2 RAKP HMAC-SHA1
Workload: 256 loops, 256 accel

Speed.GPU.#1.: 30212.5 kH/s

Hashtype: Kerberos 5 AS-REQ Pre-Auth etype 23
Workload: 256 loops, 32 accel

Speed.GPU.#1.:   924.6 kH/s

Hashtype: DNSSEC (NSEC3)
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 54214.0 kH/s

Hashtype: PostgreSQL Challenge-Response Authentication (MD5)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 64159.0 kH/s

Hashtype: MySQL Challenge-Response Authentication (SHA1)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 40260.8 kH/s

Hashtype: SIP digest authentication (MD5)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.: 20777.1 kH/s

Hashtype: SMF > v1.1
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 70290.2 kH/s

Hashtype: vBulletin < v3.8.5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 57261.8 kH/s

Hashtype: vBulletin > v3.8.5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 38066.2 kH/s

Hashtype: IPB2+, MyBB1.2+
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 78456.2 kH/s

Hashtype: WBB3, Woltlab Burning Board 3
Workload: 256 loops, 256 accel

Speed.GPU.#1.: 19960.2 kH/s

Hashtype: Joomla < 2.5.18
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   512.6 MH/s

Hashtype: PHPS
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 57243.4 kH/s

Hashtype: Drupal7
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:      566 H/s

Hashtype: osCommerce, xt:Commerce
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   262.4 MH/s

Hashtype: PrestaShop
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   151.9 MH/s

Hashtype: Django (SHA-1)
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 70289.6 kH/s

Hashtype: Django (PBKDF2-SHA256)
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:      968 H/s

Hashtype: Mediawiki B type
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 52408.8 kH/s

Hashtype: Redmine Project Management Web App
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 37901.6 kH/s

Hashtype: PostgreSQL
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   512.8 MH/s

Hashtype: MSSQL(2000)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   116.6 MH/s

Hashtype: MSSQL(2005)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   116.6 MH/s

Hashtype: MSSQL(2012)
Workload: 256 loops, 256 accel

Speed.GPU.#1.:  9469.4 kH/s

Hashtype: MySQL323
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1366.7 MH/s

Hashtype: MySQL4.1/MySQL5
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 60488.8 kH/s

Hashtype: Oracle H: Type (Oracle 7+)
Workload: 512 loops, 64 accel

Speed.GPU.#1.: 12049.4 kH/s

Hashtype: Oracle S: Type (Oracle 11+)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   118.7 MH/s

Hashtype: Oracle T: Type (Oracle 12+)
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:     1144 H/s

Hashtype: Sybase ASE
Workload: 512 loops, 32 accel

Speed.GPU.#1.:  3048.8 kH/s

Hashtype: EPiServer 6.x < v4
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 70292.0 kH/s

Hashtype: EPiServer 6.x > v4
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 40258.4 kH/s

Hashtype: md5apr1, MD5(APR), Apache MD5
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:   202.4 kH/s

Hashtype: ColdFusion 10+
Workload: 128 loops, 128 accel

Speed.GPU.#1.: 28814.0 kH/s

Hashtype: hMailServer
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 40258.8 kH/s

Hashtype: SHA-1(Base64), nsldap, Netscape LDAP SHA
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   118.7 MH/s

Hashtype: SSHA-1(Base64), nsldaps, Netscape LDAP SSHA
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   118.7 MH/s

Hashtype: SSHA-512(Base64), LDAP {SSHA512}
Workload: 256 loops, 256 accel

Speed.GPU.#1.:  9485.3 kH/s

Hashtype: LM
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   233.1 MH/s

Hashtype: NTLM
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   840.6 MH/s

Hashtype: Domain Cached Credentials (DCC), MS Cache
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   231.0 MH/s

Hashtype: Domain Cached Credentials 2 (DCC2), MS Cache 2
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:     6032 H/s

Hashtype: MS-AzureSync PBKDF2-HMAC-SHA256
Workload: 100 loops, 256 accel

Speed.GPU.#1.:   181.8 kH/s

Hashtype: descrypt, DES(Unix), Traditional DES
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:  9237.0 kH/s

Hashtype: BSDiCrypt, Extended DES
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:    49978 H/s

Hashtype: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:   211.4 kH/s

Hashtype: bcrypt, Blowfish(OpenBSD)
Workload: 32 loops, 2 accel

Speed.GPU.#1.:       62 H/s

Hashtype: sha256crypt, SHA256(Unix)
Workload: 1024 loops, 4 accel

Speed.GPU.#1.:     7340 H/s

Hashtype: sha512crypt, SHA512(Unix)
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:     2320 H/s

Hashtype: OSX v10.4, v10.5, v10.6
Workload: 512 loops, 256 accel

Speed.GPU.#1.: 70286.7 kH/s

Hashtype: OSX v10.7
Workload: 128 loops, 256 accel

Speed.GPU.#1.:  9496.4 kH/s

Hashtype: OSX v10.8+
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:      134 H/s

Hashtype: AIX {smd5}
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:   202.5 kH/s

Hashtype: AIX {ssha1}
Workload: 64 loops, 128 accel

Speed.GPU.#1.:   819.4 kH/s

Hashtype: AIX {ssha256}
Workload: 64 loops, 128 accel

Speed.GPU.#1.:   264.1 kH/s

Hashtype: AIX {ssha512}
Workload: 64 loops, 32 accel

Speed.GPU.#1.:    68236 H/s

Hashtype: Cisco-PIX MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   372.0 MH/s

Hashtype: Cisco-ASA MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   376.4 MH/s

Hashtype: Cisco-IOS SHA256
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 43080.9 kH/s

Hashtype: Cisco $8$
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:      968 H/s

Hashtype: Cisco $9$
Workload: 1 loops, 4 accel

Speed.GPU.#1.:      421 H/s

Hashtype: Juniper Netscreen/SSG (ScreenOS)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   261.7 MH/s

Hashtype: Juniper IVE
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:   210.5 kH/s

Hashtype: Android PIN
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:   100.2 kH/s

Hashtype: Citrix NetScaler
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   131.9 MH/s

Hashtype: RACF
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 48003.5 kH/s

Hashtype: GRUB 2
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:      467 H/s

Hashtype: Radmin2
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:   168.3 MH/s

Hashtype: SAP CODVN B (BCODE)
Workload: 1024 loops, 64 accel

Speed.GPU.#1.: 38197.2 kH/s

Hashtype: SAP CODVN F/G (PASSCODE)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.: 13919.5 kH/s

Hashtype: SAP CODVN H (PWDSALTEDHASH) iSSHA-1
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:   117.6 kH/s

Hashtype: Lotus Notes/Domino 5
Workload: 256 loops, 32 accel

Speed.GPU.#1.:  2481.7 kH/s

Hashtype: Lotus Notes/Domino 6
Workload: 256 loops, 32 accel

Speed.GPU.#1.:   820.2 kH/s

Hashtype: Lotus Notes/Domino 8
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:    12346 H/s

Hashtype: PeopleSoft
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   116.5 MH/s

Hashtype: 7-Zip
Workload: 1024 loops, 4 accel

Speed.GPU.#1.:      185 H/s

Hashtype: RAR3-hp
Workload: 16384 loops, 32 accel

Speed.GPU.#1.:      500 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + XTS 512 bit
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:     4932 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-SHA512 + XTS 512 bit
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:     4320 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-Whirlpool + XTS 512 bit
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:      685 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + XTS 512 bit + boot-mode
Workload: 1000 loops, 128 accel

Speed.GPU.#1.:     9098 H/s

Hashtype: Android FDE <= 4.3
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:    15238 H/s

Hashtype: eCryptfs
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:      201 H/s

Hashtype: MS Office <= 2003 MD5 + RC4, oldoffice$0, oldoffice$1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1208.1 kH/s

Hashtype: MS Office <= 2003 MD5 + RC4, collision-mode #1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1464.4 kH/s

Hashtype: MS Office <= 2003 SHA1 + RC4, oldoffice$3, oldoffice$4
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1395.2 kH/s

Hashtype: MS Office <= 2003 SHA1 + RC4, collision-mode #1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1531.1 kH/s

Hashtype: Office 2007
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:     2492 H/s

Hashtype: Office 2010
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:     1247 H/s

Hashtype: Office 2013
Workload: 1024 loops, 4 accel

Speed.GPU.#1.:      136 H/s

Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1565.0 kH/s

Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) + collider-mode #1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1755.5 kH/s

Hashtype: PDF 1.4 - 1.6 (Acrobat 5 - 8)
Workload: 70 loops, 256 accel

Speed.GPU.#1.:    72820 H/s

Hashtype: PDF 1.7 Level 3 (Acrobat 9)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 43091.9 kH/s

Hashtype: PDF 1.7 Level 8 (Acrobat 10 - 11)
Workload: 64 loops, 8 accel

Speed.GPU.#1.:      447 H/s

Hashtype: Password Safe v2
Workload: 1000 loops, 16 accel

Speed.GPU.#1.:     1398 H/s

Hashtype: Password Safe v3
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:    19071 H/s

Hashtype: Lastpass
Workload: 500 loops, 64 accel

Speed.GPU.#1.:    37493 H/s

Hashtype: 1Password, agilekeychain
Workload: 1000 loops, 64 accel

Speed.GPU.#1.:    61103 H/s

Hashtype: 1Password, cloudkeychain
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:      117 H/s

Hashtype: Bitcoin/Litecoin wallet.dat
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:       65 H/s

Hashtype: Blockchain, My Wallet
Workload: 10 loops, 256 accel

Speed.GPU.#1.:  1226.1 kH/s

Started: Sat Mar 19 18:17:29 2016
Stopped: Sat Mar 19 18:56:52 2016

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 710] [10de:128b] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: eVga.com. Corp. Device [3842:2713]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 56
    Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
    Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at e000 [size=128]
    [virtual] Expansion ROM at fe000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel driver in use: nvidia
↧
Search

Help using oclHashcat to retrieve OS X 10.11 Password

March 21, 2016, 9:57 am
$
0
0
I have a computer running OS X 10.11 that I need the password to. I can't find a guide online as to how to extract the hash to plug into oclHashcat and hopefully crack it. Can anyone help me get the password hash into oclHashcat?
↧

Dev/Testers Needed - oclhashcat API

March 22, 2016, 2:15 pm
$
0
0
I've been slowly making progress on an API for oclhashcat in the little spare time I have. It's at a point where the project could benefit from additional testing and input from the community. You can find the forked project here:

https://github.com/Rich5/oclHashcat

Some documentation on the design is here:

https://github.com/Rich5/oclHashcat/blob...ocs/API.md

https://github.com/hashcat/oclHashcat/issues/9

Constructive criticism, ideas, and pull requests are welcome. Anything other than that I don't have the time to entertain.
↧
↧

--show doesnt work

March 22, 2016, 11:00 pm
$
0
0
Hello everyone Smile

The status is "cracked" as expected but --show doesnt work.

I saw another thread for it saying that if you are in windows you need to download gawk and run another command but i have no idea what to do after downloading and installing gawk. The command given doesnt work.

* https://hashcat.net/forum/thread-1700.html

Any help would be appreciated, thanks in advance.
↧

Decrypt WPA2 Key

March 23, 2016, 9:38 am
$
0
0
Hello, I want to decrypt a WPA2 key, the file name is "something.hccap". The password length is 6 to 8 character with lowercase or numeric.

Please help me out on the mask.

Thanks
↧

Nvidia on ocl haschat OR ATI on cudahashcat

March 25, 2016, 6:38 am
$
0
0
hello i introduce my self to your genius comunity and i want to ask myself a simple question...i have a rig with gtx970 currently installed ...i am currently mining cryptocurrencies(this weekTongue)so i would like to make a small investment in a new graphics card(r9 290)...but i am also using hashcat now and then so i said to check also with you guys if is anyway to run the computational power from both cards....in mining this thing is possyble using opencl ant not cuda version,but i think here is different for some reason????please any help would be greatly appreciate!!!
edit: (silly me.......the card that i want to add is ati r9 290)
↧
Viewing all 7847 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>