Hello,
something change in the new release with TrueCrypt support (except additionnal hidden file support)?
with release 1.01:
cudaHashcat v1.01 starting...
Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 470, 1280MB, 1215Mhz, 14MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you erro
rs of code 702
You can disable it with a regpatch, see here: http://hashcat.net/wiki
/doku.php?id=timeout_patch
Device #1: Kernel ./kernels/4318/m6211.sm_20.32.ptx
Device #1: Kernel ./kernels/4318/bzero.32.ptx
Cache-hit dictionary stats pmorpwd.txt: 5089 bytes, 475 words, 475 keyspace
NOTE: autotuned --gpu-accel from 8 to 1
filexy.tc:azerty
Session.Name...: cudaHashcat
Status.........: Cracked
Input.Mode.....: File (pmorpwd.txt)
Hash.Target....: File (filexy.tc)
Hash.Type......: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES
Time.Started...: Sun May 04 22:15:14 2014 (1 sec)
Speed.GPU.#1...: 1615 H/s
Recovered......: 1/1 (100.00%) Digests, 1/1 (100.00%) Salts
Progress.......: 475/475 (100.00%)
Rejected.......: 1/475 (0.21%)
HWMon.GPU.#1...: 3% Util, 45c Temp, 1710rpm Fan
Started: Sun May 04 22:15:14 2014
Stopped: Sun May 04 22:15:15 2014
and with the new release 1.20 with same files:
D:\data\install\cudaHashcat-1.20\cudaHashcat-1.20>cudaHashcat32.exe -m 6211 fi
lexy.tc pmorpwd.txt
cudaHashcat v1.20 starting...
Device #1: GeForce GTX 470, 1280MB, 1215Mhz, 14MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you erro
rs of code 702
You can disable it with a regpatch, see here: http://hashcat.net/wiki
/doku.php?id=timeout_patch
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel ./kernels/4318/m6211.sm_20.32.ptx
Device #1: Kernel ./kernels/4318/bzero.32.ptx
Cache-hit dictionary stats pmorpwd.txt: 5089 bytes, 475 words, 475 keyspace
INFO: approaching final keyspace, workload adjusted
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: File (pmorpwd.txt)
Hash.Target....: File (filexy.tc)
Hash.Type......: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...: 1037 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 475/475 (100.00%)
Skipped........: 0/475 (0.00%)
Rejected.......: 1/475 (0.21%)
HWMon.GPU.#1...: 1% Util, 46c Temp, N/A Fan
Started: Sun May 04 22:16:38 2014
Stopped: Sun May 04 22:16:39 2014
thanks in advance
something change in the new release with TrueCrypt support (except additionnal hidden file support)?
with release 1.01:
cudaHashcat v1.01 starting...
Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 470, 1280MB, 1215Mhz, 14MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you erro
rs of code 702
You can disable it with a regpatch, see here: http://hashcat.net/wiki
/doku.php?id=timeout_patch
Device #1: Kernel ./kernels/4318/m6211.sm_20.32.ptx
Device #1: Kernel ./kernels/4318/bzero.32.ptx
Cache-hit dictionary stats pmorpwd.txt: 5089 bytes, 475 words, 475 keyspace
NOTE: autotuned --gpu-accel from 8 to 1
filexy.tc:azerty
Session.Name...: cudaHashcat
Status.........: Cracked
Input.Mode.....: File (pmorpwd.txt)
Hash.Target....: File (filexy.tc)
Hash.Type......: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES
Time.Started...: Sun May 04 22:15:14 2014 (1 sec)
Speed.GPU.#1...: 1615 H/s
Recovered......: 1/1 (100.00%) Digests, 1/1 (100.00%) Salts
Progress.......: 475/475 (100.00%)
Rejected.......: 1/475 (0.21%)
HWMon.GPU.#1...: 3% Util, 45c Temp, 1710rpm Fan
Started: Sun May 04 22:15:14 2014
Stopped: Sun May 04 22:15:15 2014
and with the new release 1.20 with same files:
D:\data\install\cudaHashcat-1.20\cudaHashcat-1.20>cudaHashcat32.exe -m 6211 fi
lexy.tc pmorpwd.txt
cudaHashcat v1.20 starting...
Device #1: GeForce GTX 470, 1280MB, 1215Mhz, 14MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you erro
rs of code 702
You can disable it with a regpatch, see here: http://hashcat.net/wiki
/doku.php?id=timeout_patch
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel ./kernels/4318/m6211.sm_20.32.ptx
Device #1: Kernel ./kernels/4318/bzero.32.ptx
Cache-hit dictionary stats pmorpwd.txt: 5089 bytes, 475 words, 475 keyspace
INFO: approaching final keyspace, workload adjusted
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: File (pmorpwd.txt)
Hash.Target....: File (filexy.tc)
Hash.Type......: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...: 1037 H/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 475/475 (100.00%)
Skipped........: 0/475 (0.00%)
Rejected.......: 1/475 (0.21%)
HWMon.GPU.#1...: 1% Util, 46c Temp, N/A Fan
Started: Sun May 04 22:16:38 2014
Stopped: Sun May 04 22:16:39 2014
thanks in advance