Guys,
First off, can i state this is only for dev purposes, not for actually getting some decent cracking speeds.
I have a HO Microserver Gen 8 with an AMD R7 240 GPU in the PCI express port and have passed that through to a ubuntu (16.04) VM using VT-d under ESXi (6.0u2).
I have installed the amdgpu-pro drivers in the VM and can see the card under lspci:
Un fortunately hash cat doesn't recognise the GPU. I have got x11 running but nothing physically plugged into the GPU ports (HDMI/DVI):
So first question, does this GPU support hash cat and OpenCL?
Secondly, what could i be doing wrong?
Thanks in advance
P.s. Reminder that this is only for test purposes (playing with VT-d GPU pass through)
First off, can i state this is only for dev purposes, not for actually getting some decent cracking speeds.
I have a HO Microserver Gen 8 with an AMD R7 240 GPU in the PCI express port and have passed that through to a ubuntu (16.04) VM using VT-d under ESXi (6.0u2).
I have installed the amdgpu-pro drivers in the VM and can see the card under lspci:
Code:
02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
02:02.0 USB controller: VMware USB2 EHCI Controller
02:04.0 SATA controller: VMware SATA AHCI controller
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland PRO [Radeon R7 240/340]
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]Un fortunately hash cat doesn't recognise the GPU. I have got x11 running but nothing physically plugged into the GPU ports (HDMI/DVI):
Code:
hashcat (v3.10) starting...
OpenCL Platform #1: Advanced Micro Devices, Inc.
================================================
- Device #1: WARNING: Not a native Intel OpenCL runtime, expect massive speed loss
You can use --force to override this but do not post error reports if you do so
- Device #1: Intel(R) Xeon(R) CPU E3-1265L V2 @ 2.50GHz, skipped
ERROR: No devices found/leftSo first question, does this GPU support hash cat and OpenCL?
Secondly, what could i be doing wrong?
Thanks in advance
P.s. Reminder that this is only for test purposes (playing with VT-d GPU pass through)