Hi guys,
I've been trying out hashcat and cudaHashcat for research purposes. The former works okay, though rather slowly, but the latter one has been giving me headaches.
0. My laptop:
Windows 10
Intel i7-3610QM
Nvidia 650M
1. First, the cudaHashcat caused BSOD whenever I ran it, with the error KERNEL_SECURITY_CHECK_FAILURE. I read on the Nvidia forums that this is due to a bug in the latest 361 drivers, so I downgraded to 359.06, as suggested there.
2. Now it runs, but throws me a cuModuleLoad() 200 error (?) every time I want to do something with it. For example, benchmarking:
or trying to break a test hash:
Any help? Any ideas at all?
Thanks in advance. If you need any more info, please ask and I will supply! :-)
I've been trying out hashcat and cudaHashcat for research purposes. The former works okay, though rather slowly, but the latter one has been giving me headaches.
0. My laptop:
Windows 10
Intel i7-3610QM
Nvidia 650M
1. First, the cudaHashcat caused BSOD whenever I ran it, with the error KERNEL_SECURITY_CHECK_FAILURE. I read on the Nvidia forums that this is due to a bug in the latest 361 drivers, so I downgraded to 359.06, as suggested there.
2. Now it runs, but throws me a cuModuleLoad() 200 error (?) every time I want to do something with it. For example, benchmarking:
Code:
C:\cudaHashcat-2.01>cudaHashcat64.exe -b
cudaHashcat v2.01 starting in benchmark-mode...
Device #1: GeForce GT 650M, 2048MB, 950Mhz, 2MCU
ERROR: cuModuleLoad() 200or trying to break a test hash:
Code:
C:\cudaHashcat-2.01>cudaHashcat64.exe -m 2500 -a3 test.hccap ?d?d?d?d?d?d?d?d
cudaHashcat v2.01 starting...
Device #1: GeForce GT 650M, 2048MB, 950Mhz, 2MCU
Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you errors of code 702
You can disable it with a regpatch, see here: http://hashcat.net/wiki/doku.php?id=timeout_patch
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Brute-Force
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel ./kernels/4318/m02500.sm_30.64.cubin
ERROR: cuModuleLoad() 200Any help? Any ideas at all?
Thanks in advance. If you need any more info, please ask and I will supply! :-)
